CORSAIR H100I DRIVER WINDOWS 10 FULL
CORSAIR H100I DRIVER WINDOWS 10 SOFTWARE
CORSAIR H100I DRIVER WINDOWS 10 PC

Pros: As expected from a good cooler, it keeps my CPU nice and cool. Assuming it will fit in your case, I would highly recommend this AIO on any system, unless your case has room for the even better Corsair H110i.ĬPU: Intel i7-4790K 4.7 GHz 1.218 volts Overall Review: Overall this cooler offers excellent cooling performance over even the best air coolers at a noticeably quieter volume. The hoses were very hard to maneuver if you have a smaller case as the braiding on the hoses makes them very strong to prevent kinking but does hinder mobility. Basically this means that when a game or another high CPU intensive application is not running the pump has to be manually changed to quiet mode or vice versa. In the Corsair Link software, the pump controls only have two options, either quiet or performance mode, why is there no custom option? For the fans a custom fan curve can be set but not the pump, which is just as if not more important. It should point towards the front of the case where in my case I have cable management holes where it could quickly disappear. Why would anyone want it pointing towards the back of their case where there is literally no easy way to cable management it and get it out of the way. If you want this cooler in this case, I suggest you do a lot of planning to make sure it will fit as it is really tight.Īssuming the water block is installed in the correct orientation, with the Corsair logo being legible and not upside down, the right angle mini USB connector is angled the opposite way that it should be. The new one however is all one piece so the screws can’t get stuck and makes it way easier to remove.Ĭons: Required a lot of effort to get it installed into a Corsair Carbide 300R case as the 4+4 pin CPU power cable, a heatsink for the motherboard and the memory were all in the way. This causes them to spin around in the plastic when you try to take out the screws making it extremely difficult to remove. That one uses metal screw holes which kind of float inside the plastic back plate. Has a new and much better back plate compared to the one on my Corsair Hydro H70. Has an RGB LED on the water block that can be set to change color when the CPU gets hot

CORSAIR H100I DRIVER WINDOWS 10 FULL

The fans and the pump were quiet even at full load USB control/monitoring of fan and pump speed via Corsair Link Pros: Has braiding around the hoses to help prevent kinking User replaceable inserts: Change the color of your cooler to match your system with the user-replaceable inserts on the radiator and pump cap (Sold Separately)Īdditional Information Date First Available Improved coldplate and pump design: better efficiency gives you lower temperatures with less noiseĪdvanced SP120L PWM fan design: better high-static pressure air delivery and customizable speedīuilt-in Corsair Link: monitor CPU and coolant temperature, adjust fan speed, and customize lighting directly from your desktop Intel LGA 2066 / 2011-v3 / 2011 / 1366 / 115xĢ40mm dual-fan radiator: more surface area for superior cooling performance I hope my cautionary headache helps someone, because this isn't on the Corsair help site.Learn more about the Corsair H100i V2 Model Brand So, bottom line, if you are having trouble getting your H100i running in iCue and the rest of your Corsair USB devices disappear, plug the stuff into USB 3.1 ports. This may be some weirdness with my ASUS 470-F Strix Gaming motherboard, but my H100i does not work with USB 2.0 ports as expected. Replugging the pump to a USB 2.0 port made the pump go away again, so I thought to plug the headphones into a USB 3.1 port. I was able to set the profiles and everything cooled off, but my headphones didn't work yet.

CORSAIR H100I DRIVER WINDOWS 10 SOFTWARE

So I reinstalled the iCue software and my pump appeared. Everything was working, but not working at the same time.Ĭutting to the chase, after much head scratching, I took my phone charger cord and plugged it into the pump, fed it out the back of my case into a USB 3.1 port. I had always used USB 2.0 ports for the headphones and the AIO is made to plug into a USB 2.0 port. I checked the pump's USB connection and it was solid, so was the connection for the headphones. I also noticed that the fans for the AIO were not spinning very fast and the CPU was relatively warm.

I opened the iCue software to see why it wasn't working and nothing was detected. I plugged and unplugged them and they didn't come on, but I had noticed the LEDs on the ear parts were lit during boot. Then I realized that my headphones no longer worked.

CORSAIR H100I DRIVER WINDOWS 10 PC

Installing the cooler was without drama and I fired up the PC and the fans and pump were spinning. I've got a nice pair of Corsair VOID headphones that I like very much and overall have been quite happy with Corsair products.

I just completed a new Ryzen build and had to buy a new liquid cooler since my old Cooler Master Seidon didn't fit the new AM4 socket.

Corsair h100i driver windows 10